What Is a Magic Corner? Blind Corner Storage Explained
A magic corner unit is a pull-out mechanism designed to make the rear of a blind-corner cabinet easier to reach. A rotating carousel accesses storage differently; the two mechanisms are not interchangeable just because both fit a kitchen corner.
Which corner layout are you choosing?
Start with the cabinet plan and how the storage needs to move. A pull-out needs room for baskets to travel through the opening; a carousel needs a compatible rotation space. A corner drawer is a different cabinet construction. Compare the exact installation drawing rather than assuming one solution has the greatest usable capacity.
Compare existing GST models
- Corner unit 04 — pull-out layout: a starting point for checking a blind-corner mechanism.
- Corner unit 02 — kidney-shape layout: compare the tray shape and movement path against the cabinet plan.
- Corner unit 03 — rotating layout: compare a rotating system rather than assuming the same fitting as a pull-out.
View the full corner storage range. Model names identify catalog layouts; included runners, closing function, finish and load limits must be confirmed for the chosen model.
What should I measure before requesting a model?
Record the clear door opening and usable internal width, depth and height. Add a top-view sketch marking the door, blind side, hinges, pipes and nearby handles. Confirm the supplier’s left/right convention on the drawing and check the entire movement path, not just the stored basket dimensions.
The cabinet measurement guide explains the difference between nominal width and usable opening. No single cabinet-size label guarantees compatibility.
Ask for a model-specific fit check
Send your sketch or measured opening, the model reference, quantity and destination country or port. Request confirmation of the fitting, supplied components and commercial terms before ordering.
